GW Instek GSP-930 Programming Manual - Manual (Page 155)

REMOTE CONTROL
153
Description Couples the Absolute Stop amplitude to the
Absolute Start amplitude for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet:STOP:ABSolute:COUPle
{OFF|ON|0|1}
Query Syntax [:SENSe]:SEMask:OFFSet:STOP:ABSolute:
COUPle?
Parameter 0 Turns coupling off.
1 Turns coupling on.
OFF Turns coupling off.
ON Turns coupling on.
Return parameter 0 Coupling is off.
1 Coupling is on.
Example SEM:OFFS1:STOP:ABS:COUP 0
[:SENSe]:SEMask:OFFSet:STOP:
RELative
Set
Query
Description Sets or queries the amplitude of the stop frequency
of the Relative Mask for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet:STOP:RELative
Query Syntax [:SENSe]:SEMask:OFFSet:STOP:RELative?
Parameter/
Return parameter dBc
offset 1~5
Example SEM:OFFS1:STOP:REL 1.5e+1
[:SENSe]:SEMask:OFFSet:STOP:
RELative:COUPle
Set
Query
Description Couples the Relative Stop amplitude to the
Relative Start amplitude for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet:STOP:RELative:COUPle
{OFF|ON|0|1}