GW Instek GSP-930 Programming Manual - Manual (Page 89)

REMOTE CONTROL
87
:CALCulate:MARKer:TRACe:AUTO
Set
Query
Description Sets or queries the state of the Marker Trace
function. Allows the selected marker to be
automatically assigned to a trace (on) or be to
manually assigned a trace (off).
Syntax :CALCulate:MARKer:TRACe:AUTO {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:TRACe:AUTO?
Parameter Marker number 1~6
0 Turn the auto function off.
1 Turn the auto function on.
OFF Turn the auto function off.
ON Turn the auto function on.
Return parameter 0 The auto function is off.
1 The auto function is on.
Example :CALC:MARK2:TRAC:AUTO OFF
:CALCulate:MARKer:TYPE
Set
Query
Description Sets or queries the marker type.
Syntax :CALCulate:MARKer:TYPE {NORMal|DELTa}
Query Syntax :CALCulate:MARKer:TYPE?
Parameter/
Return parameter Marker number 1~6
Normal marker
Delta marker
Example :CALC:MARK1:TYPE NORM
:CALCulate:MARKer:X
Set
Query
Description Sets or returns the marker position in Hz.
Syntax :CALCulate:MARKer:X
Query Syntax :CALCulate:MARKer:X?