GW Instek GSP-930 Programming Manual - Manual (Page 146)

GSP-930 Programming Manual
144
Syntax [:SENSe]:SEMask:CARRier:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:SEMask:CARRier:AUTO?
Parameter 0 Turn PSDRef/TotalPwrRef to manual
(off).
1 Turn PSDRef/TotalPwrRef to auto (on).
OFF Turn PSDRef/TotalPwrRef to manual
(off).
ON Turn PSDRef/TotalPwrRef to auto (on).
Return parameter 0 PSDRef/TotalPwrRef is set to manual.
1 PSDRef/TotalPwrRef is set to automatic.
Example :SEM:CARR:AUTO OFF
[:SENSe]:SEMask:CARRier:CPSD
Set
Query
Description Sets or queries the value of the PSDRef for SEM
measurements.
Syntax [:SENSe]:SEMask:CARRier:CPSD
Query Syntax [:SENSe]:SEMask:CARRier:CPSD?
Parameter/
Return parameter PSD ref unit = dBm/Hz
Example :SEM:CARR:CPSD 20
[:SENSe]:SEMask:CARRier:POWer
Set
Query
Description Sets or queries the value of the TotalPwrRef
amplitude for SEM measurements.
Syntax [:SENSe]:SEMask:CARRier: POWer
Query Syntax [:SENSe]:SEMask:CARRier: POWer?
Parameter
Return parameter dBm
Example :SEM:CARR:POW 2 dbm