GW Instek GSP-930 Programming Manual - Manual (Page 125)

REMOTE CONTROL
123
Parameter power or voltage
Return parameter
Example :ACPR: HLIM -3.0e+1
[:SENSe]:ACPR:LLIMit
Set
Query
Description Sets or queries the low limit for the main channel.
Used with ACPR measurement.
Syntax [:SENSe]:ACPR:LLIMit
Query Syntax [:SENSe]:ACPR:LLIMit?
Parameter power or voltage
Return parameter
Example :ACPR:ACH1:LLIM -5.0e+1
[:SENSe]:ACPR:HELP:STATe
Set
Description Turns the on-screen help on/off.
Syntax [:SENSe]:ACPR:HELP:STATe {OFF|ON|0|1}
Parameter 0 Turn help off.
1 Turn help on.
OFF Turn help off.
ON Turn help on.
Example :ACPR:HELP:STAT ON
[:SENSe]:ACPR:SPACe
Set
Query
Description Sets or queries the channel spacing between the
main channels.
Syntax [:SENSe]:ACPR:SPACe
Query Syntax [:SENSe]:ACPR:SPACe?