GW Instek GSP-930 Programming Manual - Manual (Page 75)

REMOTE CONTROL
73
:CALCulate:DEMod:EARPhone:STATe
Set
Query
Description Sets or queries the state of the ear phone out port.
Syntax :CALCulate:DEMod:EARPhone:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:DEMod:EARPhone:STATe?
Parameter 0 Turn the phone output off.
1 Turn the phone output on.
OFF Turn the phone output off.
ON Turn the phone output on.
Return parameter 0 Phone output is off.
1 Phone output is on.
Example :CALC:DEM:EARP:STAT 1
:CALCulate:DEMod:FM:RESult:CURRent?
Query
Description Returns the current measurement results for FM
demodulation as a comma separated string.
Query Syntax :CALCulate:DEMod:FM:RESult:CURRent?
Return parameter
deviation Frequency deviation in Hz.
rate Modulation rate in Hz.
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB.
Query Example :CALC:DEM:FM:RES:CURR?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1
:CALCulate:DEMod:FM:RESult:MINimum?
Query
Description Returns the minimum recorded measurement
results for FM demodulation as a comma
separated string.
Query Syntax :CALCulate:DEMod:FM:RESult:MINimum?