GW Instek GSP-930 Programming Manual - Manual (Page 142)

GSP-930 Programming Manual
140
Parameter
Return parameter Hz
Example :PMET:FREQ 2e+7
[:SENSe]:PMETer:HLIMit
Set
Query
Description Sets or queries the power meter high limit for
pass/fail tests.
Syntax [:SENSe]:PMETer:HLIMit
Query Syntax [:SENSe]:PMETer:HLIMit?
Parameter power unit, default = dBm
Return parameter Unit = current unit.
Example :PMET:HLIM 10
[:SENSe]:PMETer:HOLD:STATe
Set
Query
Description Turns the power meter Max/Min Hold function
on/off or queries its state.
Syntax [:SENSe]:PMETer:HOLD:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:PMETer:HOLD:STATe?
Parameter 0 Turn the Max/Min Hold function off.
1 Turn the Max/Min Hold function on.
OFF Turn the Max/Min Hold function off.
ON Turn the Max/Min Hold function on.
Return parameter 0 The Max/Min Hold function is off.
1 The Max/Min Hold function is on.
Example :PEMT:HOLD:STAT 0
[:SENSe]:PMETer:LLIMit
Set
Query
Description Sets or queries the power meter low limit for
pass/fail tests.