GW Instek GSP-930 Programming Manual - Manual (Page 35)

REMOTE CONTROL
33
SCPI Command The SCPI Command page allows you to enter
SCPI commands directly from the browser for
full remote control. Please see the programming
manual for details. A password must be
entered before remote commands can be used.
Password: lxiWNpwd
[Note: password is case sensitive.]
Get Image The Get Image page allows the browser to
remotely capture a screenshot of the GSP-930
display.
Note
For further details, please see the programming
manual, available on the GW Instek web site @
www.gwinstek.com.