GW Instek GSP-930 Programming Manual - Manual (Page 105)

REMOTE CONTROL
103
Parameter Power or voltage in the current Y-
axis unit.
Return parameter
Example :DISP:TRAC:Y:DLIN -5.0e+1
:DISPlay[:WINDow]:TRACe:Y:DLINe:STATe
Set
Query
Description Turns the display line on/off or queries its state.
Syntax :DISPlay[:WINDow]:TRACe:Y:DLINe:STATe
{OFF|ON|0|1}
Query Syntax :DISPlay[:WINDow]:TRACe:Y:DLINe:STATe?
Parameter 0 Turn display line off.
1 Turn display line on.
OFF Turn display line off.
ON Turn display line on.
Return parameter 0 The display line is off.
1 The display line is on.
Example :DISP:TRAC:Y:DLIN:STAT ON
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:
NRLevel
Set
Query
Description Sets or queries the normalized reference level for
the TG option.
Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:NRLevel
Query Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:NRLevel?
Parameter Power or voltage in the current Y-
axis unit.
Return parameter
Example :DISP:TRAC:Y:NRLevel 5 dBm