GW Instek GSP-930 Programming Manual - Manual (Page 165)

REMOTE CONTROL
163
:SOURce:POWer[:LEVel][:IMMediate]
[:AMPLitude]:STEP
Set
Query
Description Sets or queries the tracking generator step level.
Syntax :SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]:
STEP
Query Syntax :SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]:
STEP?
Parameter
Return parameter dB
Example :SOUR:POW:STEP .5 db
:SOURce:POWer[:LEVel][:IMMediate]
[:AMPLitude]:STEP:AUTO
Set
Query
Description Turns the tracking generator step level setting to
auto (on) or manual (off).
Syntax :SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]:
STEP:AUTO {OFF|ON|0|1}
Query Syntax :SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]:
STEP:AUTO?
Parameter 0 Turn TG step level to manual (off).
1 Turn TG step level to auto (on).
OFF Turn TG step level to manual (off).
ON Turn TG step level to auto (on).
Return parameter 0 TG step level is set to manual.
1 TG step level is set to automatic.
Example :SOUR:POW:STEP:AUTO 1
:SOURce:POWer:MODE
Set
Query
Description Sets the Power Sweep mode.