GW Instek GSP-930 Programming Manual - Manual (Page 135)

REMOTE CONTROL
133
Example :DEM:FILT:LPAS B
[:SENSe]:DEMod:IFBW
Set
Query
Description Sets or queries the IF bandwidth for the AM/FM
Analysis function.
Syntax [:SENSe]:DEMod:IFBW
Query Syntax [:SENSe]:DEMod:IFBW?
Parameter
Return parameter Hz
Example DEM:IFBW 3.0e+5
[:SENSe]:DETector[:FUNCtion]
Set
Query
Description Sets or queries the trace detection mode when in
manual mode.
Syntax [:SENSe]:DETector[:FUNCtion]
{AVERage|SAMPle|POSitive|NEGative|NORMal}
Query Syntax [:SENSe]:DETector[:FUNCtion]?
Parameter/
Return parameter AVERage Sets the detector mode to Average.
SAMPle Sets the detector mode to Sample.
POSitive Sets the detector mode to Peak+.
NEGative Sets the detector mode to Peak-.
NORMal Sets the detector mode to Normal.
Example :DET NORM
[:SENSe]:DETector[:FUNCtion]:AUTO
Set
Query
Description Turns the trace detection mode to auto (on) or
manual (off) or queries its state.
Syntax [:SENSe]:DETector[:FUNCtion]:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:DETector[:FUNCtion]:AUTO?