GW Instek GSP-930 Programming Manual - Manual (Page 88)

GSP-930 Programming Manual
86
ON Turn the selected marker on.
Return parameter 0 The selected marker is off.
1 The selected marker on.
Example :CALC:MARK1:STAT ON
:CALCulate:MARKer:TABLe:STATe
Set
Query
Description Sets or queries the state of the marker table.
Syntax :CALCulate:MARKer:TABLe:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:TABLe:STATe
Parameter 0 Turn the table off.
1 Turn the table on.
OFF Turn the table off.
ON Turn the table on.
Return parameter 0 The table is off.
1 The table is on.
Example :CALC:MARK:TABL:STAT ON
:CALCulate:MARKer:TRACe
Set
Query
Description Assigns the selected marker to a trace. Queries
which trace the selected marker is assigned to.
Syntax :CALCulate:MARKer:TRACe
Query Syntax :CALCulate:MARKer:TRACe?
Parameter/
Return parameter Marker number 1~6
name> The name of the trace: (1, 2, 3, 4)
Example :CALC:MARK2:TRAC 1