GW Instek GSP-930 Programming Manual - Manual (Page 86)

GSP-930 Programming Manual
84
Parameter/
Return parameter FREQuency Sort by frequency.
AMPLitude Sort by amplitude.
Example :CALC:MARK:PEAK:SORT:TYPE FREQ
:CALCulate:MARKer:PEAK:TABLe:STATe
Set
Query
Description Sets or queries the state of the Peak Table.
Syntax :CALCulate:MARKer:PEAK:TABLe:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:PEAK:TABLe:STATe?
Parameter 0 Turn peak table off.
1 Turn peak table on.
OFF Turn peak table off.
ON Turn peak table on.
Return parameter 0 peak table is off.
1 peak table is on.
Example :CALC:MARK:PEAK:TABL:STAT ON
:CALCulate:MARKer:PEAK:THReshold
Set
Query
Description Sets or queries the peak threshold value.
Syntax :CALCulate:MARKer:PEAK:THReshold < ampl>
Query Syntax :CALCulate:MARKer:PEAK:THReshold?
Parameter < ampl> Peak Threshold level
Return parameter Peak threshold. Note: the unit returned
depends on the currently set vertical
units.
Example :CALC:MARK:PEAK:THR -3 dBm
:CALCulate:MARKer:PEAK:THReshold:
STATe
Set
Query
Description Sets or queries the state of the Peak Threshold.