GW Instek GSP-930 Programming Manual - Manual (Page 162)

GSP-930 Programming Manual
160
Syntax [:SENSe]:SWEep:EGATe:LENGth
Query Syntax [:SENSe]:SWEep:EGATe:LENGth?
Parameter/
Return parameter Gate length time in seconds
Example SWE:EGAT:LENG 10 ms
[:SENSe]:SWEep:EGATe:STATe
Set
Query
Description Turns the gated sweep mode on/off or queries its
state.
Syntax [:SENSe]:SWEep:EGATe:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:SWEep:EGATe:STATe?
Parameter 0 Turns gated sweep mode off.
1 Turns gated sweep mode on.
OFF Turns gated sweep mode off.
ON Turns gated sweep mode on.
Return parameter 0 Gated sweep mode is off.
1 Gated sweep mode is on.
Example :SWE:EGAT:STAT 1
[:SENSe]:SWEep:TIME
Set
Query
Description Sets the sweep time.
Syntax [:SENSe]:SWEep:TIME
Query Syntax [:SENSe]:SWEep:TIME?
Parameter/
Return parameter Sweep time in seconds
Example SWE:TIME 60 ms
[:SENSe]:SWEep:TIME:AUTO
Set
Query
Description Turns the Sweep time setting to auto (on) or
manual (off).