GW Instek GSP-930 Programming Manual - Manual (Page 83)

REMOTE CONTROL
81
:CALCulate:MARKer:FCOunt:X?
Query
Description Returns the counter frequency of the selected
marker in Hz.
Query Syntax :CALCulate:MARKer:FCOunt:X?
Parameter Marker number 1~6.
Return parameter Frequency in Hz.
Example :CALC:MARK1:FCO:X?
>2.0083e+8
:CALCulate:MARKer:NOISe:STATe
Set
Query
Description Sets or queries the state of the Marker Noise
function.
Syntax :CALCulate:MARKer:NOISe:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:NOISe:STATe?
Parameter Marker number 1~6.
0 Turn marker noise off.
1 Turn marker noise on.
OFF Turn marker noise off.
ON Turn marker noise on.
Return parameter 0 Marker noise is off.
1 Marker noise is on.
Example :CALC:MARK2:NOIS:STAT ON
:CALCulate:MARKer:NOISe:Y?
Set
Query
Description Returns the normalized noise level over a BW of
1Hz from the marker position.
Query Syntax :CALCulate:MARKer:NOISe:Y?