GW Instek GSP-930 Programming Manual - Manual (Page 152)

GSP-930 Programming Manual
150
Syntax [:SENSe]:SEMask:OFFSet:BANDwidth|BWIDth
[:RESolution]
Query Syntax [:SENSe]:SEMask:OFFSet:BANDwidth|BWIDth
[:RESolution]?
Parameter/
Return parameter Hz
offset 1~5
Example SEM:OFFS1:BAND 3.0e+3
[:SENSe]:SEMask:OFFSet:BANDwidth|B
WIDth[:RESolution]:AUTO
Set
Query
Description Turns the resolution bandwidth for the selected
channel to manual or automatic mode or queries
its state.
Syntax [:SENSe]:SEMask:OFFSet:BANDwidth|BWIDth
[:RESolution]:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:SEMask:OFFSet:BANDwidth|BWIDth
[:RESolution]:AUTO?
Parameter 0 Set RBW to manual.
1 Set RBW to auto.
OFF Set RBW to manual.
ON Set RBW to auto.
Return parameter 0 RBW is set to manual.
1 RBW is set to auto.
[:SENSe]:SEMask:OFFSet:FREQuency:
STARt
Set
Query
Description Sets or queries the start frequency of the selected
offset.
Syntax [:SENSe]:SEMask:OFFSet:FREQuency:STARt
Query Syntax [:SENSe]:SEMask:OFFSet:FREQuency:STARt?