GW Instek GSP-930 Programming Manual - Manual (Page 87)

REMOTE CONTROL
85
Syntax :CALCulate:MARKer:PEAK:THReshold:STATe
{ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:PEAK:THReshold:STATe?
Parameter 0 Turn peak threshold off.
1 Turn peak threshold on.
OFF Turn peak threshold off.
ON Turn peak threshold on.
Return parameter 0 Peak threshold is off.
1 Peak threshold is on.
Example :CALC:MARK:PEAK:THR:STAT ON
:CALCulate:MARKer:SET
Set
Description Sets the selected marker to one of five preset
positions.
Query Syntax :CALCulate:MARKer:SET {CENTer|STARt|STOP
|STEP|RLEVel}
Parameter Marker number 1~6
CENTer Set to center frequency
STARt Set to start frequency
STOP Set to stop frequency
STEP Set to CF STEP frequency
RLEVel Set to the Reference level
Example :CALC:MARK1:SET CENT
:CALCulate:MARKer:STATe
Set
Query
Description Sets or queries the state of the selected marker.
Syntax :CALCulate:MARKer:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:MARKer:STATe?
Parameter Marker number 1~6
0 Turn the selected marker off.
1 Turn the selected marker on.
OFF Turn the selected marker off.