GW Instek GSP-930 Programming Manual - Manual (Page 74)

GSP-930 Programming Manual
72
:CALCulate:DEMod:AM:RESult:MAXimum?
Query
Description Returns the maximum recorded measurement
results for AM demodulation as a comma
separated string.
Query Syntax :CALCulate:DEMod:AM:RESult:MAXimum?
Return parameter
depth Modulation depth in %.
rate Modulation rate in Hz.
power Carrier power in the current Y-axis units.
offset Carrier frequency offset in Hz.
sinad Signal to noise and distortion ratio in dB.
Query Example :CALC:DEM:AM:RES:MAX?
>9.840e+1,1.02e+2,-1.12e+1,3.21e+1,1.61e+1
:CALCulate:DEMod:AM:STATe
Set
Query
Description Sets or queries the state of the AM Analysis
function.
Syntax :CALCulate:DEMod:AM:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:DEMod:AM:STATe?
Parameter 0 Turn AM Analysis off.
1 Turn AM Analysis on.
OFF Turn AM Analysis off.
ON Turn AM Analysis on.
Return parameter 0 AM Analysis is off.
1 AM Analysis is on.
Example :CALC:DEM:AM:STAT 1