GW Instek GSP-930 Programming Manual - Manual (Page 95)

REMOTE CONTROL
93
Description Turns the SEM measurement on/off or queries its
state.
Syntax :CALCulate:SEM:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:SEM:STATe?
Parameter 0 Turns SEM off.
1 Turns SEM on.
OFF Turns SEM off.
ON Turns SEM on.
Return parameter 0 SEM is off.
1 SEM is on.
Example :CALC:SEM:STAT ON
:CALCulate:SEM:OFFSet:RESult?
Query
Description Returns the start, stop frequencies as well as the
pass/fail limits and judgements for the chosen
offset.
Query syntax :CALCulate:SEM:OFFSet:RESult?
Parameter Offset number 1~5.
Return parameter Start frequency of the selected channel
Lower dBm measurement
Lower pass/fail limit judgment.
0 = pass, 1 = fail.
Stop frequency of the selected channel
Upper dBm measurement
Upper pass/fail limit judgment
0 = pass, 1 = fail.
Example :CALC:SEM:OFFS1:RES?
>9e+7, -7.9e+1,0,1.7e+7,-6.9e+1,0
:CALCulate:TOI:DIFFerential?
Query
Description Returns the third order intermodulation distortion.
Query syntax :CALCulate:TOI:DIFFerential?