GW Instek GSP-930 Programming Manual - Manual (Page 79)

REMOTE CONTROL
77
Query Syntax :CALCulate:LIMit:DATA?
Parameter/
Return parameter pt#1 freq, pt#1 limit, …….pt#10 freq,
pt#10 limit.
Seleted limit line
Example :CALCulate:LIMit3:DATA?
>1e+6,-10,2e+6,-30,3e+6,-40,4e+6……………
:CALCulate:LIMit:FAIL?
Query
Description Returns the Pass/Fail judgment.
Query Syntax :CALCulate:LIMit:FAIL?
Return parameter 0 Pass
1 Fail
Query Example :CALC:LIM:FAIL?
>1
:CALCulate:LIMit:LOW
Set
Description Selects which limit line is used for the low limit.
Syntax :CALCulate:LIMit:LOW
Parameter num> 1~5
Example :CALC:LIM:LOW 2
:CALCulate:LIMit:HIGH
Set
Description Selects which limit line is used for the high limit.
Syntax :CALCulate:LIMit:HIGH
Parameter num> 1~5
Example :CALC:LIM:HIGH 2