Lincoln Electric IM8000 CHECKPOINT - Manual (Page 51)

Shift Schedules Chapter 4. Managing CheckPoint™
IM8000 CheckPoint™ User Manual 4.11
Field Description
End Date
End Date
The End Date section allows you to determine when the shift stops. There are
three options.
ƒ If there is no end date for the shift, choose The shift continues forever.
ƒ If the shift only occurs a certain number of times, choose the second
option and specify how many times you want the shift to occur.
ƒ The last option allows you to select a certain date on which the shift
ends. You can manually type the date or use the interactive calendar.
To use the calendar, click on the calendar icon ( ).
Repeat Settings
Repeat Frequency The Repeat Frequency field allows you to determine how often this shift
configuration repeats. The settings available depend on the frequency you
select.
Repeat Frequency:
None When you select None from the drop-down, the shift is set up to never repeat.
The shift occurs only once on the effective date and then becomes inactive.
The system disables the No starting date option in the Start Date section and
disables the whole End Date section. For example, an extra shift might have
occurred only once on 03/28/2012.
Repeat Frequency:
Hourly When you set a shift to repeat Hourly, you can configure how many hours make
up that “hourly” interval. To change the number of hours, either manually type
a number into the text field or use the up and down arrows to increase or
decrease the value.