Lincoln Electric Invertec V305-T AC - Manual

LincolnElectric.com E3.115 © Lincoln Global, Inc., All Rights Reserved 2008
THE LINCOLN ELECTRIC COMPANY TIG WELDER
LincolnElectric.com
TIG WELDER Invertec ® V310-T AC/DC OPTIONS Invertec ® V310-T AC/DC
THE LINCOLN ELECTRIC COMPANY
Selectable Half Wave Shapes
Not only can you choose Sine, Square or Triangular, the Positive
vs. Negative half of the wave shape can be independently
changed.
Example: Select a square positive wave to minimize high peak
current that erodes the tungsten and select a triangular wave
for the negative half to minimize heat input to the weld.
Selectable AC Wave Shapes
Shown:
K2228-1 Invertec
® V305-T AC/DC
with K2630-1 Cool Arc ® 35 Water Cooler
• Adjustable AC Frequency
• Expanded AC Balance Control
• Selectable AC Waveshapes
• High Speed DC TIG Pulsing
Excellent Welding Performance
Expanded AC Balance
Inverters can be set to a higher ratio of Electrode
Negative (%EN) for:
• Better penetration with narrow bead profile
• Minimized tungsten erosion (keep a sharp point)
• Minimize etching adjacent to the weld
High Speed DC TIG Pulsing
Conventional TIG Pulsing (<10 Pulses per second pps)
• Timed filler metal & consistent bead appearance
• Reduces heat input by alternating between peak current
and background to minimizes distortion
High Speed TIG Pulsing (Up to 2500 pps)
• Increased puddle agitation for improved weld microstructure
• Focused stable arc
• Increased travel speeds
• Reduced heat input
Adjustable AC Output Frequency
Higher Frequency narrows or focuses the arc cone,
allowing precise control of arc and access into tight joints.
Lower Frequency widens the arc cone, minimizing agitation
of base metal.
Smaller Heat
Affected Zone
Smaller Bead Profile
New Cart – Makes a Complete System (K2694-1)
• Low cylinder platform - Holds a full size 160lb bottle
• Storage compartment with latch
• Open tool tray with rubber mat
• Torch hanger
Cool Arc ® 35 – The Smart Cooler (K2630-1)
• Shuts machine output off if loss of coolant is sensed.
• Speed adjusts based on coolant temperature for quiet operation and long life.
• Fits in a neat modular fashion below the Invertec ® V310-T AC/DC
• Gets its power from the Invertec ® V310-T AC/DC No extra outlets to plug into.
New Cart
Makes a Complete Solution
Product Product Input Power Input Current @ H x W x D Net Weight
Name Number Phase Voltage/Hertz Rated Output Rated Output (1) Output Range inches (mm) lbs.(kg)
Invertec ® K2228-1 3-Phase 460/50/60 210A / 18.4V / 100% 7.3 5-310A 17.3 x 10.6 x 24 75
V310-T AC/DC 230A / 19.2V / 60% 8.3 Max. OCV: (439 x 269 x 609) (34)
310A / 22.4V / 40% 12.3 80V
230/50/60 210A / 18.4V / 100% 13.9
230A / 19.2V / 60% 15.8
310A / 22.4V / 30% 24.6
208/50/60 210A / 18.4V / 100% 15.3
230A / 19.2V / 60% 17.5
310A / 22.4V / 30% 27.3
1-Phase 460/50/60 200A / 18.0V / 100% 13.6
220A / 18.8V / 60% 14.9
310A / 22.4V / 35% 23.1
230/50/60 200A / 18.0V / 100% 21.9
220A / 18.8V / 60% 24.6
310A / 22.4V / 25% 41.5
208/50/60 200A / 18.0V / 100% 24.2
220A / 18.8V / 60% 27.7
310A / 22.4V / 25% 47.3
(1) Input current on 60 hertz input.
PROCESSES
• Stick
• TIG
OUTPUT INPUT
ONE-PAK ® PKG. (K2695-1) INCLUDES
• K2228-1 Invertec ® V310-T AC/DC
• K2630-1 Cool Arc ® 35 Water Cooler
• K2694-1 Inverter Cart
• K2267-1 TIG Mate ™ 20 Torch Kit
• K870 Foot Amptrol ®
• K918-1 Zippered Cable Cover
KEY OPTIONS
• K2630-1 Cool Arc ® 35 Water Cooler
• K2694-1 Inverter Cart
• K2666-1 TIG Mate ™ 17 Air Cooled TIG Torch Starter Pack
• K870 Foot Amptrol ®
• K963-3 Hand Amptrol ®
• More options at end of section
LITERATURE
E3.115
AC
DC
Options
Tool tray with rubber mat and storage compartment Torch hanger
The Invertec ® V310-T AC/DC is the most technologically
advanced AC/DC TIG welder in its class. It fits the bill
for serious fabrication, maintenance, and production
work. Its compact, lightweight size makes it ideal
for field applications like advanced motorsports,
aerospace, shipbuilding, and construction.
• Dynamic LCD Display (patent pending)
• Adjustable AC Frequency and Selectable Waveshapes
• Soft, Crisp and AC Stick Modes
• Optional Cool Arc ® 35 “Smart” water cooler
• 208-460 1/3 phase auto-reconnect
• High efficiency inverter
CONVENTIONAL TIG BALANCE
Electrode Positive = Cleaning + Tungsten Heating
Less Penetration (-)
TIME
%EP
%EN
+
-
WELDING AMPERAGE
Electrode Negative (%EN) = Penetration
More Penetration (-)
TIME
%EP
%EN
+
-
WELDING AMPERAGE
EXPANDED INVERTER TIG BALANCE
Wave Type Description Result
Square Responsive arc with Stable arc with good puddle
fast zero crosses and control and fast travel speed
reduced peak
amperages Minimizes tungsten superheating
Sine Traditional smooth Soft sounding arc
shaped waveform
Triangular Minimized area Lower amperages can
(heat) under the minimize heat input to the weld
curve shape
with high peaks High peaks more forceful for
anodized applications
Maintain Sharp
Tungsten
Less Area Means
Less Heat Into Weld
Min. Frequency (20Hz)
20Hz
Max Frequency (200Hz)
200Hz
WELDING CURRENT
TIME
Background
Peak
PULSE FREQUENCY:
Number of Pulses Per Second
High Heat
(Peak)
Low Heat
(Background)
Field Installed
Options
TIG Torch
Starter Kits
Torch
Adapters
Magnum ®
TIG Torches
Part # Description Part # Description Part # Description Part # Description
K857 Remote Output
Control 25 ft. K2266-1 TIG-Mate™ 17
K1622-1 PTA-9/17 Twist-
Mate
® Adapter
K1781-1
K1781-3 PTA-9 w/ 12.5 ft. cable
PTA-9 w/ 25 ft. cable
K870 Foot Amptrol ® K1782-1
K1782-3 PTA-17 w/ 12.5 ft. cable
PTA-17 w/ 25 ft. cable
K963-3 Hand Amptrol ® K2267-1 TIG-Mate™ 20 K1622-3 PTA-26 Twist-
Mate
® Adapter
K1783-1
K1783-3 PTA-26 w/ 12.5 ft. cable
PTA-26 w/ 25 ft. cable
K814 Arc Start Switch
K1622-4 Water Cooled Twist-
Mate
® Adapter
K1784-3
K1784-4 PTW-20 w/ 12.5 ft. cable
PTW-20 w/ 25 ft. cable
K2694-1 Inverter Cart K2413-1 TIG-Mate™ 9 K1784-1
K1784-2 PTW-18 w/ 12.5 ft. cable
PTW-18 w/ 25 ft. cable