Lincoln Electric IM8000 CHECKPOINT - Manual (Page 131)

IM8000 CheckPoint™ User Manual 10.1
Chapter 10
Assembly Listing Tab
The Assembly Listing tab is for use with the Weld Sequencer software and provides comprehensive part
assembly information, including cycle time, arc time, actual versus expected weld counts and total wire
deposition. CheckPoint™ captures and associates each weld record with a specific part/assembly reference
and displays this information for you in the Assembly Listing tab so you can easily review and analyze the
data.
NOTE | If you do not use Weld Sequencer, no data displays here.
Overview Report
The Overview tab provides you with a list of all assemblies performed on the Welding Power Source or
Container of power sources you have selected in the Asset Tree. You can use the Criteria link to customize
the date range that the report covers.
Figure 10.1 Assembly Listing Overview
The Assembly Name column is a linked column. This allows you to drill down into the list of weld records
within that assembly. You can then drill down into the details of each individual weld.
Main Overview List
The main Overview list (Figure 10.1) displays all of the assemblies during the time period you selected
under the Criteria link. Table 10.1 explains the columns of this report in more detail. The columns are the
same whether you have selected a Welding Power Source or a Container of power sources in the Asset
Tree. The data displayed reflects the asset you have chosen.
Table 10.1 Columns on the Overview Report
Field Description
Assembly Name The Assembly Name is the name the Weld Engineer added when they created
the sequences in Weld Sequencer.
Quantity This is the number of Weld Sequence instances that have been performed
within this assembly.