Lincoln Electric IM8000 CHECKPOINT - Manual (Page 158)

Chapter 13. Events Tab History
13.4 CheckPoint™ User Manual IM8000
History
To research any events that have occurred, you can use the History report to analyze the performance of
the power source(s) over a period of time. The History report details every occurrence of events on the
single Welding Power Source you have selected in the Asset Tree or the Container of power sources you
have selected. You can also isolate a specific event by using the Criteria to narrow the data.
TIP | To print this report, click the Print icon ( ) at the top of
the report. You can also export the data from this report in
either Microsoft Excel or a CSV file. Please see page 6.7 for
more details.
Figure 13.3 Events History Report
Table 13.3 Columns on the Events – History Report
Field Description
Welder The Welder column displays the Welding Power Source that experienced the
event listed in this entry.
Time of Event The Time of Event column displays the calendar date and specific time at which
the event was issued on a power source.
Event Log Type There are several types of events that can occur on a Welding Power Source.
CheckPoint™ collects the data from these events and groups them into
categories. The Event Log Type lists the category in which this specific event
falls. Page 13.1 explains these in a little more detail.
Source and
Description The Source and Description columns display more detailed information about
the type of event. For example, if the Event Log Type is a Limit event, the
Source and Description columns tell you which limit (e.g., a WeldScore limit or a
Duration limit).