Lincoln Electric IM8000 CHECKPOINT - Manual (Page 36)

Chapter 3. Setting up CheckPoint™ Uploading the Installation Key File
3.4 CheckPoint™ User Manual IM8000
Uploading the Installation Key File
Once you validate the administrator user account, you need to register your first Welding Power Source.
You register a power source by uploading the installation key file you saved on page 2.10. Only then will
you be able to finish registering your company and begin adding more users and power sources to
CheckPoint™.
NOTE | You must register at least one Welding Power Source to
create a valid company account. You will not be able to
continue without the installation key file. See page 2.10 for
details on saving the key file.
After you click the validation link in the e-mail, the system opens a page detailing instructions on how to
save the Welding Power Source installation key file for those without access to this manual. You can click
Continue on that page.
Figure 3.5 Uploading the Installation Key File
To create the first Welding Power Source entry in CheckPoint™ and upload the installation key file:
Procedure Details
1. Click the Continue button at the bottom of
the Registration Step 1 page.
The CheckPoint™ Registration Step 2 page opens
(Figure 3.5).
2. Enter the name of the power source in the
Welder Name field.
The text you enter here appears as the name of
the welder in the Asset Tree for all users (Figure
4.21 on page 4.22). Be sure you can distinguish
multiple Welding Power Sources from one
another.
3. Enter information about the Welding Power
Source in the Welder Description field.
Generally, you want to use the Welder Description
field to display the model of the power source.
See Figure 3.5.
4. Next to the Installation File field, click the
Select button