Lincoln Electric IM8000 CHECKPOINT - Manual (Page 147)

Profile Reports Chapter 11. Weld Listing Tab
IM8000 CheckPoint™ User Manual 11.11
Table 11.4 Criteria Available on the Weld Listing – Weld Profile Report
Field Description
Start Date and
End Date Select a date range in which the weld(s) were performed for the profile data you want
to review. Welds completed within this date range (that also occurred during the
shift you select) appear in the resulting report.
TIP | You can type the date into the field, or you can click the calendar icon ( )
next to the field to display an interactive calendar where you can click on the date
you want. Use the arrow icons ( and ) to navigate to previous or future months.
The double arrow icons ( and ) move forward and backward by three-month
intervals.
Shift If you want to see weld data for a specific shift during the date range you chose, select
that shift from the Shift drop-down. CheckPoint™ narrows the data to include only
welds performed during the times of that shift. The CheckPoint™ administrator
configured the shifts in the CheckPoint™ Manager.
Profile Reports
The remaining reports on the Weld Listing tab provide you with line graphs on the various parameters of
the Weld Profiles used to make welds with the Welding Power Source or Container of power sources you
have selected in the Asset Tree. Each report contains a legend across the bottom to show you each profile
by color.
NOTE | You can generate these reports for a single Welding Power
Source or a Container of power sources.
Figure 11.6 Example Report
The power of these reports lies in the ability to select a specific Weld Profile. CheckPoint™ remembers
your criteria, which allows you to click through the individual reports for that specific profile and time
period quickly.