Yokogawa DAQWORX - Manual (Page 27)

2-3 IM WX13-01E
Entering Settings (Launcher)
1
2
3
4
5
Index
6
2.3 Setting Up Projects
A project is a group of settings required for operating AddTrigger. You can create as
many projects as you like and save them.
By switching projects, you can easily switch between different sets of AddTrigger
settings.
Note
You cannot carry out the operations described below if scanning is in progress or when
Programs other than the Launcher are running.
Creating a New Project
Procedure
1. Choose File > Project Settings from the Launcher menu bar. The Project Setting
dialog box opens.
By default, the new project is registered under the name Project1.
2. Click New. The New Project dialog box opens.
3. Enter a project name and click OK. A new project is created.
Note
• Enter a project name using up to 16 alphanumeric characters.
• The project name may not contain any of the following characters: \ / : , ; * ? ”< > |.
• A project name may not start with a period.
• You cannot create a project with the same name as another existing project.
4. To use password protection, select the Use Password Protection check box.
The New Password Setting dialog box opens.