Watlow EZ-ZONE RME - Manual (Page 90)

Watlow EZ-ZONE ® RME Module • 87 • Chapter 6 Features
push the Advance key ‰ to proceed to the
Password [ pass] prompt. If not find your way
back to the Factory Page as described above.
4. Execute the calculation defined below (7b or 8b)
for either the User or Administrator.
5. Enter the result of the calculation in the upper
display play by using the Up ¿ and Down ¯ arrow
keys or use EZ-ZONE Confgurator Software.
6. Exit the Factory Page by pushing and holding the
Infinity
ˆ
key for two seconds.
Formulas used by the User and the Administrator to
calculate the Password follows:
Passwords equal:
7. User
a. If Rolling Password [roll] is Off, Password
[pass] equals User Password [pas;u].
b. If Rolling Password [roll] is On, Password
[pass] equals:
([pas;u] x code) Mod 929 + 70
8. Administrator
a. If Rolling Password [roll] is Off, Password
[pass] equals Administrator Password
[ pas ;a ]
.
b. If Rolling Password [roll] is On, Password
[pass] equals:
([pas;a] x code) Mod 997 + 1000
Differences Between a User Without Password,
User With Password and Administrator
- User without a password is restricted by the
Locked Access Level [loC;l].
- A User with a password is restricted by the
Read Lockout Security [rloC] never having ac-
cess to the Lock Menu [`loC].
- An Administrator is restricted according to the
Read Lockout Security [rloC] however, the Ad-
ministrator has access to the Lock Menu where
the Read Lockout can be changed.