Watlow EZ-ZONE RME - Manual (Page 82)

Watlow EZ-ZONE ® RME Module • 79 • Chapter 5 Factory Page
Expansion Module • Factory Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Param-
eter
ID
Data
Type
& Read/
Write
[rLoC]
[rLoC] Security Setting
Read Lock
Set the read security clearance
level. The user can access the se-
lected level and all lower levels.
Applies regardless of Password En-
able setting. Set the Read Lock
clearance level. The user can
have read access to the selected
level and all lower levels. If the
Write Security level is higher
than the Read Lock, the Read
Lock level takes priority.
1 to 5 5 6958 0x67 (103)
1
0x0A (10)
- - - - 3010 uint
RWE
[SLoC]
[SLoC] Security Setting
Write Security
Set the write security clearance
level. The user can access the se-
lected level and all lower levels.
Applies regardless of Password
Enable setting. Set the Write
Security clearance level. The user
can have write access to the se-
lected level and all lower levels. If
the Write Security level is higher
than the Read Lock, the Read
Lock level takes priority.
0 to 5 5 6960 0x67 (103)
1
0x0B (11)
- - - - 3011 uint
RWE
[loC;l]
[LoC.L] Security Setting
Locked Access Level
Determines user level menu
visibility when Password is en-
abled. See Features section under
Password Security. This setting
is in addition to Read Lock and
Write Security. Consider using
only Locked Access Level and Set
Read Lock and Write Security
to 5.
1 to 5 5 - - - - - - - - - - - - - - - - - - - -
[roll]
[roLL] Security Setting
Rolling Password
Applies if Password Enable is
ON. When power is cycled a new
Public Key will be displayed.
[`off] Off
[``on] On
Off - - - - - - - - - - - - - - - - - - - -
[pas;u]
[PAS.u] Security Setting
User Password
Applies if Password Enable is
ON. Used to acquire access to
menus made available through
the Locked Access Level setting.
Do not forget the password as it
is required to change Locked Ac-
cess Level, Read Lock or Write
Security.
10 to 999 63 - - - - - - - - - - - - - - - - - - - -
Note: Some values will be rounded off to fit in the four-character display . Full values can
be read with another interface .
If there is only one instance of a menu, no submenus will appear .
R: Read
W: Write
E: EE-
PROM
S: User
Set