Watlow EZ-ZONE RME - Manual (Page 73)

Watlow EZ-ZONE ® RME Module • 70 • Chapter 4 Setup Page
RME Module • Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Param-
eter
ID
Data
Type
&
Read/
Write
[sfn;D]
[SFn.d] Math (1 to 8)
Source Function D
Set the type of function
that will be used for this
source.
[nonE] None (61)
[``Ai] Analog Input (142)
[CUrr] Current (22)
[`C;Pr] Cool Power, Control
Loop (161)
[`h;Pr] Heat Power, Control
Loop (160)
[PWr] Power, Control Loop
(73)
[`Lnr] Linearization (238)
[MAt] Math (240)
[``Pu] Process Value (241)
[`SP;C] Set Point Closed,
Control Loop (242)
[`SP;o] Set Point Open,
Control Loop (243)
[`uAr] Variable (245)
2186
[offset 70]
0x7D (125)
1 to 8
4
- - - - 25004 uint
RWES
[`si;D]
[ iS.d] Math (1 to 8)
Source Instance D
Set the instance of the
function selected above.
1 to 250 1 2196
[offset 70]
0x7D (125)
1 to 8
9
- - - - 25009 uint
RWES
[`s2;D]
[ SZ.d] Math (1 to 8)
Source Zone D
Set the zone of the function
selected above.
0 to 16 0 2206
[offset 70]
0x7D (125)
1 to (16)
0x0E (14)
- - - - 25014 uint
RWES
[sfn;E]
[ Sr.E] Math (1 to 8)
Source Function E
Set the type of function
that will be used for this
source.
[none] None (61)
[ALM] Alarm (6)
[`CPE] Compare (230)
[`Ctr] Counter (231)
[`dio] Digital I/O (1142)
[Ent;A] Profile Event Out
A (233)
[Ent;b] Profile Event Out
B (234)
[Ent;C] Profile Event Out
C (235)
[Ent;d] Profile Event Out
D (236)
[Ent;E] Profile Event Out
E (247)
[Ent;F] Profile Event Out
F (248)
[Ent;g] Profile Event Out
G (249)
[Ent;h] Profile Event Out
H (250)
[`FUn] Function Key
(1001)
[`lgC] Logic (239)
[tMr] Timer (244)
[`uAr] Variable (245))
None 2188
[offset 70]
0x7D (125)
1 to 8
5
- - - - 25005 uint
RWES
Note:
Some values will be rounded off to fit in the four-character display . Full values can be read
with other interfaces .
Note:
If there is only one instance of a menu, no submenus will appear .
** These parameters/prompts are available in these menus with firmware revisions 6 .0 and
above .
R: Read
W: Write
E: EEPROM
S: User Set