Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 69)

FAQ Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments 51
5. OPTIONAL HARDWARE AND SOFTWARE
This includes a brief description of the hardware and software options available for the Model GFC
7000TA Gas Filter Correlation Carbon Dioxide Analyzer. For assistance with ordering these options
please contact the Sales department of Teledyne Analytical Instruments at:
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
16830 Chestnut Street
City of Industry, CA 91748
Telephone: (626) 934-1500
Fax: (626) 961-2538
Web: www.teledyne-ai.com
5.1. Rack Mount Kits (Options 20A, 20B, 21 and 23)
OPTION NUMBER DESCRIPTION
20A Rack mount brackets with 26 in. chassis slides.
20B Rack mount brackets with 24 in. chassis slides.
21 Rack mount brackets only
23 Rack Mount for External Pump Pack (No Slides).
Each of these options permits the Analyzer to be mounted in a standard 19" x 30" RETMA rack.
5.2. Current Loop Analog Outputs (Option 41)
This option adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog outputs. This
option may be ordered separately for any of the analog outputs; it can be installed at the factory or added
later. Call TAI sales for pricing and availability.
The current loop option can be configured for any output range between 0 and 20 mA. Figure 5-1
provides installation instructions and illustrates a sample combination of one current output and two
voltage outputs configuration. Information on calibrating or adjusting these outputs can be found in
Section 6.13.4.4.