Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 237)

Troubleshooting Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments 219
To view or clear the various warning messages press:
SAMPLE WHEEL TEMP WARNING CO2 = XX.XX
TEST CAL MSG CLR SETUP
Make sure warning messages
are not due to
legitimate problems..
Press CLR to clear the
message currently being
Displayed.
If more than one warning is
active the next message will
take its place
Once the last warning has been
cleared, the analyzer returns to
SAMPLE Mode
SAMPLE RANGE=500.00 PPM CO2 = XX.XX
< TST TST > CAL
MSG CLR SETUP
SAMPLE WHEEL TEMP WARNING CO2 = XX.XX
< TST TST > CAL
MSG CLR SETUP
TEST deactivates Warning
Messages until New warning(s)
are activated
MSG activates Warning
Messages.
> keys replaced with
TEST key
Figure 10-1: Viewing and Clearing Warning Messages