Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 105)

Operating Instructions Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments 87
6.7.2.12. HOLDOFF Feature
The DAS HOLDOFF feature allows to prevent data collection during calibrations and during the
DAS_HOLDOFF
period enabled and specified in the VARS (Section 6.12). To enable or disable the
HOLDOFF, follow the instruction shown in Section 6.7.2.2 then press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
SET> EDIT PRINT EXIT
SETUP X.X CAL HOLD OFF:ON
SET> EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X CAL HOLD OFF:ON
ON ENTR EXIT
Toggle to turn HOLDOFF
ON or OFF
Press SET> key until…
From the DATA ACQUISITION menu
(see Section 6.7.2.2)