beautypg.com

Teledyne GFC-7000T - Trace CO2 Analyzer - manual User Manual

Page 150

background image

Operating Instructions

Model GFC7000TA Carbon Dioxide Analyzer

Teledyne Analytical Instruments

132


mA

IN OUT

V OUT +

V OUT -

I IN +

I IN -

Recording
Device

Analyzer

See Table 3-1 for

pin assignments of

the Analog Out

connector on the

rear panel.

Figure 6-12:

Setup for Calibrating Current Outputs

NOTE

Do not exceed 60 V between current loop outputs and instrument ground.

To adjust the zero and span values of the current outputs, activate the ANALOG I/O
CONFIGURATION MENU (See Section 6.13.1), then press: