beautypg.com

Teledyne GFC-7000T - Trace CO2 Analyzer - manual User Manual

Page 272

background image

Troubleshooting

Model GFC7000TA Carbon Dioxide Analyzer

Teledyne Analytical Instruments

254

6. Install the new Disk-on-Module, making sure the notch at the end of the chip matches the notch

in the socket.

7. It may be necessary to straighten the pins somewhat to fit them into the socket. Press the chip

all the way in.

8. Close the rear panel and turn on power to the machine.

9. If the replacement DOM carries a firmware revision, re-enter all of the setup information.

See also other documents in the category Teledyne Equipment: