Teledyne GFC-7000T - Trace CO2 Analyzer - manual - Manual (Page 30)

Getting Started Model GFC7000TA Carbon Dioxide Analyzer
Teledyne Analytical Instruments 12
Figure 3-2: Display Screen and Touch Control
CAUTION – Avoid Damaging Touchscreen
Do not use hard-surfaced instruments such as pens to operate the touchscreen.
The front panel liquid crystal display includes touch control. Upon analyzer start-up, the display shows a
splash screen and other initialization indicators before the main display appears, similar to Figure 3-2
above (may or may not display a Fault alarm). The LEDs on the display screen indicate the Sample,
Calibration and Fault states; also on the screen is the gas concentration field (Conc), which displays real-
time readouts for the primary gas and for the secondary gas if installed. The display screen also shows
which mode the analyzer is currently in (Mode field), as well as messages and data (Param field). Along
the bottom of the screen is a row of touch control buttons; only those that are currently applicable will
have a label. Table 3-1 provides detailed information for each component of the screen.