ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 75)

ZyWALL 5 User’s Guide
74 Chapter 3 Wizard Setup
3.2.2 Internet Access Wizard Setup Complete
Well done! You have successfully set up your ZyWALL to operate on your network and
access the Internet.
Figure 15 Internet Access Wizard Setup Complete
My IP Address Type the (static) IP address assigned to you by your ISP.
My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
Server IP Address Type the IP address of the PPTP server.
Connection ID/
Name
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
WAN IP Address
Assignment
IP Address
Assignment
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
My WAN IP
Address
Enter your WAN IP address in this field.
First DNS Server
Second DNS
Server
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Finish Click Finish to complete and save the wizard setup.
Table 11 ISP Parameters : PPTP Encapsulation
LABEL D ESCRIPTION