ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 119)

ZyWALL 5 User’s Guide
118 Chapter 6 Wireless LAN
Figure 40 Wireless: 802.1x + No WEP
The following table describes the wireless LAN security labels in this screen.
6.11.7 No Access 802.1x + Static WEP
Select No Access 802.1x + Static WEP to deny all wireless stations access to your wired
network and allow wireless stations to communicate with the ZyWALL using static WEP keys
for data encryption.
Table 30 Wireless: 802.1x + No WEP
LABEL DESCRIPTION
Security Select 802.1x + No WEP from the drop-down list.
ReAuthenticati
on Timer
(Seconds)
Specify how often wireless stations have to reenter usernames and passwords in order
to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wired network after
a period of inactivity. The wireless station needs to enter the username and password
again before access to the wired network is allowed.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view and/or
edit the list of users and passwords. Click RADIUS to go to the RADIUS screen where
you can configure the ZyWALL to check an external RADIUS server.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.