Remote management, 1 remote management overview, 1 remote management limitations – ZyXEL Communications ZyXEL ZyWALL 5 User Manual
Page 332: Chapter 21 remote management
ZyWALL 5 User’s Guide
Chapter 21 Remote Management
331
C
H A P T E R
21
Remote Management
This chapter provides information on the Remote Management screens.
21.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See
for details on configuring firewall rules.
You may manage your ZyWALL from a remote location via:
Note: When you choose WAN only or ALL (LAN & WAN& DMZ), you still need to
configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyWALL
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
3 Telnet
4 HTTPS and HTTP
21.1.1 Remote Management Limitations
1 Remote management over LAN or WAN will not work when:
• Internet (WAN only)
• ALL (LAN&WAN&DMZ)
• LAN only,
• DMZ only,
• Neither (Disable).