ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 517)

ZyWALL 5 User’s Guide
516 Chapter 39 System Maintenance Menus 8 to 10
39.3.1 Resetting the Time
The ZyWALL resets the time in three instances:
• On leaving menu 24.10 after making changes.
• When the ZyWALL starts up, if there is a timeserver configured in menu 24.10.
• 24-hour intervals after starting.
End Date (mm-
nth-week-hr)
Configure the day and time when Daylight Saving Time ends if you selected Yes in
the Daylight Saving field. The hr field uses the 24 hour format. Here are a couple
of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Oct., Last, Sun. and type 02 in
the hr field.
Daylight Saving Time ends in the European Union on the last Sunday of October.
All of the time zones in the European Union stop using Daylight Saving Time at the
same moment (1 A.M. GMT or UTC). So in the European Union you would select
Oct., Last, Sun. The time you type in the hr field depends on your time zone. In
Germany for instance, you would type 02 because Germany's time zone is one
hour ahead of GMT or UTC (GMT+1).
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel“ to save your configuration, or press [ESC] to cancel.
Table 196 Menu 24.10 System Maintenance: Time and Date Setting
FIELD DESCRIPTION