ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 204)

ZyWALL 5 User’s Guide
Chapter 12 Content Filtering Registration and Reports 203
C
H A P T E R
12
Content Filtering Registration
and Reports
This chapter describes how to register for content filtering and view content filtering reports.
Before you activate content filtering, you must create an account at myZyXEL.com and
register your device.
Note: To activate content filtering, you need to access myZyXEL.com via the device
on which you wish to register for content filtering.
You can only use the content filtering with the device upon which you register it. You cannot
change devices. Your device's MAC address and serial number (see the sticker on the rear side
of your device) identify it. You need to register separately for each device on which you wish
to enable content filtering.
When registering, you need to enter a PIN (see your iCard). Be sure to buy the correct iCard
for your device. If you wish to try content filtering before buying an iCard, then fill in the trial
application for a free 30-day trial.
Content filtering reports are generated statistics and charts of access attempts to web sites
belonging to the categories you selected in your device content filter screen.
You can also view content filtering reports during the free trial.
12.1 Introduction to myZyXEL.com
myZyXEL.com is ZyXEL’s online services center where you can register your ZyXEL
device. You can also generate an activation key and service set key that may be needed to use
device-specific feature(s).