ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 67)

ZyWALL 5 User’s Guide
66 Chapter 2 Introducing the Web Configurator
Figure 9 Home : Show Statistics
The following table describes the labels in this screen.
2.4.5 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the
ZyWALL as a DHCP server or disable it. When configured as a server, the ZyWALL provides
the TCP/IP configuration for the clients. If DHCP service is disabled, you must have another
DHCP server on your LAN, or else the computer must be manually configured.
Click Show DHCP Table in the HOME screen when the ZyWALL is set to router mode.
Read-only information here relates to your DHCP status. The DHCP table shows current
DHCP client information (including IP Address, Host Name and MAC Address) of all
network clients using the ZyWALL’s DHCP server.
Table 6 Home : Show Statistics
LABEL DESCRIPTION
Port This is the WAN, Dial Backup, LAN, DMZ or WLAN port.
Status This displays the port speed and duplex setting if you’re using Ethernet
encapsulation and Down (line is down), Idle (line (ppp) idle), Dial (starting to trigger
a call) or Drop (dropping a call) if you’re using PPPoE encapsulation.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total amount of time the line has been up.
System Up Time This is the total time the ZyWALL has been on.
Poll Interval(s) Enter the time interval for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop Click Stop to stop refreshing statistics.