ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 396)

ZyWALL 5 User’s Guide
Chapter 25 Introducing the SMT 395
25.3.2 SMT Menus Overview
The following table gives you an overview of your ZyWALL’s various SMT menus.
3 LAN Setup Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port.
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
5 DMZ Setup Use this menu to configure your public servers connected to the DMZ
port.
6 Route Setup Use this menu to configure your WAN route assessment, traffic redirect
properties and failover parameters.
11 Remote Node Setup Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12 Static Routing Setup Configure IP static routes in this menu.
15 NAT Setup Use this menu to configure Network Address Translation.
21 Filter and Firewall
Setup
Configure filters, activate/deactivate the firewall and view the firewall
log.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.
23 System Password Change your password in this menu (recommended).
24 System Maintenance From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
25 IP Routing Policy Setup From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this menu to exit (necessary for remote configuration).
Table 145 Main Menu Summary
NO. MENU TITLE FUNCTION
Table 146 SMT Menus Overview
MENUS SUB MENUS
1 General Setup 1.1 Configure Dynamic DNS 1.1.1 DDNS Host Summary 1.1.1 DDNS Edit Host
2 WAN Setup 2.1 Advanced WAN Setup
3 LAN Setup 3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP Setup 3.2.1 IP Alias Setup
3.5 Wireless LAN Setup 3.5.1 WLAN MAC Address
Filter
4 Internet Access Setup
5 DMZ Setup 5.1 DMZ Port Filter Setup
5.2 TCP/IP Setup 5.2.1 IP Alias Setup