ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 373)

ZyWALL 5 User’s Guide
372 Chapter 23 Logs Screens
Figure 192 LAN IP Address Report Example
The following table describes the labels in this screen.
23.4.4 Reports Specifications
The following table lists detailed specifications on the reports feature.
Table 133 LAN IP Address Report
LABEL DESCRIPTION
IP Address This column lists the LAN IP addresses to and/or from which the most traffic has
been sent. The LAN IP addresses are listed in descending order with the LAN IP
address to and/or from which the most traffic was sent listed first.
Direction This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN or DMZ. This field displays Outgoing to denote traffic that is going out from the
LAN or DMZ to the WAN.
Amount This column displays how much traffic has gone to and from the listed LAN IP
addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic sent to and from the LAN IP address. The count starts over
at 0 if the total traffic sent to and from a LAN IP passes the bytes count limit ( Table
134 on page 372 ).
Table 134 Report Specifications
LABEL DESCRIPTION
Number of web
sites/protocols
or ports/IP
addresses listed:
20
Hit count limit: Up to 2 32 hits can be counted per web site. The count starts over at 0 if it passes four
billion.
Bytes count
limit:
Up to 2 64 bytes can be counted per protocol/port or LAN IP address. The count starts
over at 0 if it passes 2 64 bytes.