ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 213)

ZyWALL 5 User’s Guide
212 Chapter 12 Content Filtering Registration and Reports
3 Enter a valid URL or IP address of a web site in the Test if Web site is blocked field and
click the Test Against Internet Server button.
When content filtering is active, you should see an access blocked or access forwarded
message. An error message displays if content filtering is not active.
12.6 Updating Product Registration Information
1 Click CONTENT FILTER, Categories and then Register. The myZyXEL.com login
screen opens (see Figure 2 on page 209 ).
2 After entering the user name and password from your myZyXEL.com account, click My
Product (see Figure 92 on page 209 ) and the link for your ZyWALL to open the Service
Management screen where you can modify your registration information (see Figure 95
on page 211 ).
3 From this screen, you may click Rename under Manage Product to modify your
product’s name, click Transfer under Manage Product to move the registered product
to another pre-registered user account at myZyXEL.com, click Delete under Manage
Product to remove the product registration or click Reinstall under Manage Product to
install the product again with another authentication code (for up to three times). If you
have activated a service on a registered product, you cannot delete that product. You
cannot modify the PIN code, activation date or expiry date. Change the information that
you need to modify and click Submit.
12.7 Viewing Content Filtering Reports
Content filtering reports are generated statistics and charts of access attempts to web sites
belonging to the categories you selected in your device content filter screen.
You need to register your iCard before you can view content filtering reports.
Alternatively, you can also view content filtering reports during the free trial (up to 30 days).
1 In the Service Management screen (see Figure 95 on page 211 ) click Content Filtering
in the Service Name field to open the following screen.