1 id type and content examples – ZyXEL Communications ZyXEL ZyWALL 5 User Manual
Page 226
ZyWALL 5 User’s Guide
Chapter 14 VPN Screens
225
between three encryption algorithms (DES, 3DES and AES), two authentication algorithms
(MD5 and SHA1) and two key groups (DH1 and DH2) when you configure a VPN rule (see
). The ID type and content act as an extra level of identification
for incoming SAs.
The type of ID can be a domain name, an IP address or an e-mail address. The content is the IP
address, domain name, or e-mail address.
14.7.1 ID Type and Content Examples
Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
The two ZyWALLs in this example can complete negotiation and establish a VPN tunnel.
Table 63 Local ID Type and Content Fields
LOCAL ID TYPE= CONTENT=
IP
Type the IP address of your computer or leave the field blank to have the ZyWALL
automatically use its own IP address.
DNS
Type a domain name (up to 31 characters) by which to identify this ZyWALL.
Type an e-mail address (up to 31 characters) by which to identify this ZyWALL.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address.
Table 64 Peer ID Type and Content Fields
PEER ID TYPE=
CONTENT=
IP
Type the IP address of the computer with which you will make the VPN connection
or leave the field blank to have the ZyWALL automatically use the address in the
Remote Gateway Address field.
DNS
Type a domain name (up to 31 characters) by which to identify the remote IPSec
router.
Type an e-mail address (up to 31 characters) by which to identify the remote IPSec
router.
Subject Name
Type the subject name (up to 255 characters) by which to identify the remote IPSec
router. This option is available only when you set Authentication Key to
Certificate.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address. The domain name also does not
have to match the remote router’s IP address or what you configure in the Remote Gateway Address
field below.
Table 65 Matching ID Type and Content Configuration Example
ZYWALL A
ZYWALL B
Local ID type: E-mail
Local ID type: IP
Local ID content: [email protected]
Local ID content: 1.1.1.2