ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 492)

ZyWALL 5 User’s Guide
Chapter 37 System Information & Diagnosis 491
Table 189 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host Enter 1 to ping any machine (with an IP address) on your LAN or WAN. Enter
its IP address in the Host IP Address field below.
WAN DHCP Release Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal Enter 3 to renew your WAN DHCP settings.
Internet Setup Test Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to Chapter 29 on page 425 for more
details. This feature is only available for dial-up connections using PPPoE or
PPTP encapsulation.
Reboot System Enter 11 to reboot the ZyWALL.
WAN If you entered 2 or 3 in the Enter Menu Selection Number field, enter the
number of the WAN port in this field.
Host IP Address If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.