ZyXEL Communications ZyXEL ZyWALL 5 - Manual (Page 116)

ZyWALL 5 User’s Guide
Chapter 6 Wireless LAN 115
6.11.4 802.1x + Dynamic WEP
Select 802.1x + Dynamic WEP from the Security list.
Figure 38 Wireless: 802.1x + Dynamic WEP
The following wireless LAN security fields become available when you select 802.1x +
Dynamic WEP in the Security drop down list-box.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 27 Wireless: WPA (continued)
LABEL DESCRIPTION
Table 28 Wireless: 802.1x + Dynamic WEP
LABEL DESCRIPTION
Security Select 802.1x + Dynamic WEP from the drop-down list.
ReAuthentication
Timer (Seconds)
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.