Paxar 9474 - Manual (Page 81)

S e l e c t i n g P r i n t S p e e d
The 9474 supports three print speeds. Serial bar codes will print
at 2.5 inches per second. Parallel bar codes will print at 5 or 7
inches per second. The initial default setting will be 7 inches per
second. In order to change the setting, complete the following
steps.
1. From the main menu, press d to display Printer
Configuration. Press e . You’ll see
Enter password: _ _ _ _ _ _ _ _
Type the 1-8 character password and press e .
When you first receive the printer, the
password is MANAGER.
2. You’ll see the Configuration Options menu.
Select Config Option:
Define Check Digit Schemes
Press d until you see Select Print Speed. Press e to
select this option. You will see
Select Print Speed: 7
5) OR 7) in/sec
3. Type 5 or 7 to change the print speed and press e . The
printer will display the Configuration Options Menu.
Select Config Option:
Select Print Speed
5-36 Setting Printer Options