Paxar 9474 - Manual (Page 47)

B a t c h S e p a r a t o r s
This feature lets you use batch separators with or without a
stacker. For the Monarch® 925

stacker, a double length tag
with no stripe is printed. The printer default is No batch
separators.
1. From the main menu select Printer Options and press e .
2. When you see
Select Printer Option:
Use Batch Separators
Press e to select this option.
3. You’ll see
Use Batch Separators [Y/N]: N
Press e if you don’t want to use batch separators. The
screen shows the Print Option menu.
Or, type Y to use batch separators, and press e . The
screen shows:
Adjust Separator Length [Y/N]: N
4. Press e if you want the batch separator to be the same
length as a normal tag.
Or, type Y and press e if you want the batch separator to
be 3mm longer than a normal tag. The screen shows the
Print Option menu.
If you are using batch separators on a 925 stacker, you will
always get a double length tag (with no stripe). Entering Y at
5-2 Setting Printer Options