Paxar 9474 User Manual
Page 160
If the printing is not aligned properly on the supply, you can
realign it. To do this
5. From the main menu select Printer Options and
press e . You’ll see
Select Printer Option:
Use Batch Separators
6. Press d until you see Define Supply Type, then
press e . You’ll see
Select Supply Type: B
A)lign, B)lack Mark or D)ie Cut
7. Type A and press e .
M o n i t o r i n g B a t c h e s
You can use the Batch Control mode to check or change the
status of batches in the print queue. You can
◆
cancel the current batch (the batch that is printing). See
"Canceling a Batch."
◆
delete a batch from the queue. See "Deleting a Batch."
◆
reprint the last batch. See "Reprinting a Batch."
You can delete or reprint a batch while batches are printing.
When you select Batch Control mode, the printer stops printing.
To exit Batch Control, press 1 after making your selections.
Printing resumes automatically.
From the main menu, press u or d to display Batch Control
and press e . The screen briefly displays the message
WARNING (batch control)
Printing suspended until exit. _
Printing Offline and Batches 8-17